Internet Engineering Task Force (IETF) M. Petit-Huguenin Request for Comments: 5928 Unaffiliated Category: Standards Track August 2010 ISSN: 2070-1721 Traversal Using Relays around NAT (TURN) Resolution Mechanism Abstract This document defines a resolution mechanism to generate a list of server transport addresses that can be tried to create a Traversal Using Relays around NAT (TURN) allocation. Status of This Memo This is an Internet Standards Track document. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 5741. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at http://www.rfc-editor.org/info/rfc5928. Copyright Notice Copyright (c) 2010 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Petit-Huguenin Standards Track [Page 1] RFC 5928 TURN Resolution August 2010 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 2 2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 3 3. Resolution Mechanism . . . . . . . . . . . . . . . . . . . . . 3 4. Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4.1. Multiple Protocols . . . . . . . . . . . . . . . . . . . . 6 4.2. Remote Hosting . . . . . . . . . . . . . . . . . . . . . . 7 4.3. Compatibility with TURN . . . . . . . . . . . . . . . . . 8 5. Security Considerations . . . . . . . . . . . . . . . . . . . 8 6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 9 6.1. RELAY Application Service Tag Registration . . . . . . . . 9 6.2. turn.udp Application Protocol Tag Registration . . . . . . 9 6.3. turn.tcp Application Protocol Tag Registration . . . . . . 9 6.4. turn.tls Application Protocol Tag Registration . . . . . . 10 7. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 10 8. References . . . . . . . . . . . . . . . . . . . . . . . . . . 10 8.1. Normative References . . . . . . . . . . . . . . . . . . . 10 8.2. Informative References . . . . . . . . . . . . . . . . . . 11 1. Introduction The Traversal Using Relays around NAT (TURN) specification [RFC5766] defines a process for a TURN client to find TURN servers by using DNS SRV resource records, but this process does not let the TURN server administrators provision the preferred TURN transport protocol between the client and the server and does not allow the TURN client to discover this preference. This document defines an S-NAPTR application [RFC3958] for this purpose. This application defines "RELAY" as an application service tag and "turn.udp", "turn.tcp", and "turn.tls" as application protocol tags. Another usage of the resolution mechanism described in this document would be Remote Hosting as described in [RFC3958], Section 4.4. For example, a Voice over IP (VoIP) provider who does not want to deploy TURN servers could use the servers deployed by another company but could still want to provide configuration parameters to its customers without explicitly showing this relationship. The mechanism permits one to implement this indirection, without preventing the company hosting the TURN servers from managing them as it sees fit. [TURN-URI] can be used as a convenient way of carrying the four components (see Section 3) needed by the resolution mechanism described in this document. A reference implementation is available [REF-IMPL]. Petit-Huguenin Standards Track [Page 2] RFC 5928 TURN Resolution August 2010 2. Terminology The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. 3. Resolution Mechanism The resolution mechanism is used only to create an allocation. All other transactions use the IP address, transport, and port used for a successful allocation creation. The resolution mechanism only selects the transport used between the TURN client and the TURN server. The transport used by the allocation itself is selected by the REQUESTED-TRANSPORT attribute as described in Section 6.1 of [RFC5766]. The resolution algorithm uses a boolean flag, ; an IP address or domain name, ; a port number that can be empty, ; and a transport name that can be "udp", "tcp", or empty, as input. These four parameters are part of the user configuration of the TURN client. The resolution mechanism also uses as input a list, ordered by preference of supported TURN transports (UDP, TCP, Transport Layer Security (TLS)), that is provided by the application using the TURN client. This list reflects the capabilities and preferences of the application code that is using the S-NAPTR resolver and TURN client, as opposed to the configuration parameters that reflect the preferences of the user of the application. The output of the algorithm is a list of {IP address, transport, port} tuples that a TURN client can try in order to create an allocation on a TURN server. An Allocate error response as specified in Section 6.4 of [RFC5766] is processed as a failure, as specified by [RFC3958], Section 2.2.4. The resolution stops when a TURN client gets a successful Allocate response from a TURN server. After an allocation succeeds or all the allocations fail, the resolution context MUST be discarded, and the resolution algorithm MUST be restarted from the beginning for any subsequent allocation. Servers temporarily blacklisted as described in Section 6.4 of [RFC5766], specifically because of a 437, 486, or 508 error code, MUST NOT be used for the specified duration, even if returned by a subsequent resolution. First, the resolution algorithm checks that the parameters can be resolved with the list of TURN transports supported by the application: Petit-Huguenin Standards Track [Page 3] RFC 5928 TURN Resolution August 2010 o If is false and is defined as "udp" but the list of TURN transports supported by the application does not contain UDP, then the resolution MUST stop with an error. o If is false and is defined as "tcp" but the list of TURN transports supported by the application does not contain TCP, then the resolution MUST stop with an error. o If is true and is defined as "udp", then the resolution MUST stop with an error. o If is true and is defined as "tcp" but the list of TURN transports supported by the application does not contain TLS, then the resolution MUST stop with an error. o If is true and is not defined but the list of TURN transports supported by the application does not contain TLS, then the resolution MUST stop with an error. o If is defined but unknown, then the resolution MUST stop with an error. After verifying the validity of the parameters, the algorithm filters the list of TURN transports supported by the application by removing the UDP and TCP TURN transport if is true. If the list of TURN transports is empty after this filtering, the resolution MUST stop with an error. After filtering the list of TURN transports supported by the application, the algorithm applies the steps described below. Note that in some steps, and have to be converted to a TURN transport. If is false and is defined as "udp", then the TURN UDP transport is used. If is false and is defined as "tcp", then the TURN TCP transport is used. If is true and is defined as "tcp", then the TURN TLS transport is used. This is summarized in Table 1. +----------+-------------+----------------+ | | | TURN Transport | +----------+-------------+----------------+ | false | "udp" | UDP | | false | "tcp" | TCP | | true | "tcp" | TLS | +----------+-------------+----------------+ Table 1 Petit-Huguenin Standards Track [Page 4] RFC 5928 TURN Resolution August 2010 1. If is an IP address, then it indicates the specific IP address to be used. If is not defined, then either the default port declared in [RFC5766] for the "turn" SRV service name if is false, or the "turns" SRV service name if is true, MUST be used for contacting the TURN server. If is defined, then and are converted to a TURN transport as specified in Table 1. If is not defined, the filtered TURN transports supported by the application are tried by preference order. If the TURN client cannot contact a TURN server with this IP address and port on any of the transports supported by the application, then the resolution MUST stop with an error. 2. If is a domain name and is defined, then is resolved to a list of IP addresses via DNS A and AAAA queries. If is defined, then and are converted to a TURN transport as specified in Table 1. If is not defined, the filtered TURN transports supported by the application are tried in preference order. The TURN client can choose the order to contact the resolved IP addresses in any implementation-specific way. If the TURN client cannot contact a TURN server with this port, the transport or list of transports, and the resolved IP addresses, then the resolution MUST stop with an error. 3. If is a domain name and is not defined but is defined, then the SRV algorithm defined in [RFC2782] is used to generate a list of IP address and port tuples. is used as Name, a value of false for as "turn" for Service, a value of true for as "turns" for Service, and as Protocol (Proto) in the SRV algorithm. and are converted to a TURN transport as specified in Table 1, and this transport is used with each tuple for contacting the TURN server. The SRV algorithm recommends doing an A query if the SRV query returns an error or no SRV RR; in this case, the default port declared in [RFC5766] for the "turn" SRV service name if is false, or the "turns" SRV service name if is true, MUST be used for contacting the TURN server. Also in this case, this specification modifies the SRV algorithm by recommending an A and AAAA query. If the TURN client cannot contact a TURN server at any of the IP address and port tuples returned by the SRV algorithm with the transport converted from and , then the resolution MUST stop with an error. Petit-Huguenin Standards Track [Page 5] RFC 5928 TURN Resolution August 2010 4. If is a domain name and and are not defined, then is converted to an ordered list of IP address, port, and transport tuples via the Straightforward Naming Authority Pointer (S-NAPTR) algorithm defined in [RFC3958] by using as the initial target domain name and "RELAY" as the application service tag. The filtered list of TURN transports supported by the application are converted in application protocol tags by using "turn.udp" if the TURN transport is UDP, "turn.tcp" if the TURN transport is TCP, and "turn.tls" if the TURN transport is TLS. The order to try the application protocol tags is provided by the ranking of the first set of NAPTR records. If multiple application protocol tags have the same ranking, the preferred order set by the application is used. If the first NAPTR query fails, the processing continues in step 5. If the TURN client cannot contact a TURN server with any of the IP address, port, and transport tuples returned by the S-NAPTR algorithm, then the resolution MUST stop with an error. 5. If the first NAPTR query in the previous step does not return any result, then the SRV algorithm defined in [RFC2782] is used to generate a list of IP address and port tuples. The SRV algorithm is applied by using each transport in the filtered list of TURN transports supported by the application for the Protocol (Proto), for the Name, "turn" for the Service if is false, or "turns" for the Service if is true. The same transport that was used to generate a list of tuples is used with each of these tuples for contacting the TURN server. The SRV algorithm recommends doing an A query if the SRV query returns an error or no SRV RR; in this case, the default port declared in [RFC5766] for the "turn" SRV service name if is false, or the "turns" SRV service name if is true, MUST be used for contacting the TURN server. Also in this case, this specification modifies the SRV algorithm by recommending an A and AAAA query. If the TURN client cannot contact a TURN server at any of the IP address and port tuples returned by the SRV algorithm with the transports from the filtered list, then the resolution MUST stop with an error. 4. Examples 4.1. Multiple Protocols With the DNS RRs in Figure 1 and an ordered TURN transport list of {TLS, TCP, UDP}, the resolution algorithm will convert the parameters (=false, ="example.net", =empty, =empty) to the list of IP address, port, and protocol tuples in Table 2. Petit-Huguenin Standards Track [Page 6] RFC 5928 TURN Resolution August 2010 example.net. IN NAPTR 100 10 "" RELAY:turn.udp "" datagram.example.net. IN NAPTR 200 10 "" RELAY:turn.tcp:turn.tls "" stream.example.net. datagram.example.net. IN NAPTR 100 10 S RELAY:turn.udp "" _turn._udp.example.net. stream.example.net. IN NAPTR 100 10 S RELAY:turn.tcp "" _turn._tcp.example.net. IN NAPTR 200 10 A RELAY:turn.tls "" a.example.net. _turn._udp.example.net. IN SRV 0 0 3478 a.example.net. _turn._tcp.example.net. IN SRV 0 0 5000 a.example.net. a.example.net. IN A 192.0.2.1 Figure 1 +-------+----------+------------+------+ | Order | Protocol | IP address | Port | +-------+----------+------------+------+ | 1 | UDP | 192.0.2.1 | 3478 | | 2 | TLS | 192.0.2.1 | 5349 | | 3 | TCP | 192.0.2.1 | 5000 | +-------+----------+------------+------+ Table 2 4.2. Remote Hosting In the example in Figure 2, a VoIP provider (example.com) is using the TURN servers managed by the administrators of the example.net domain (defined in Figure 1). The resolution algorithm using the ordered TURN transport list of {TLS, TCP, UDP} would convert the same parameters as in the previous example but with the parameter equal to "example.com" to the list of IP address, port, and protocol tuples in Table 2. example.com. IN NAPTR 100 10 "" RELAY:turn.udp:turn.tcp:turn.tls "" example.net. Figure 2 Petit-Huguenin Standards Track [Page 7] RFC 5928 TURN Resolution August 2010 4.3. Compatibility with TURN In deployments where it is not possible to guarantee that all TURN clients will support the resolution mechanism described in this document, the DNS configuration should be done in a way that works with both this resolution mechanism and the mechanism described in [RFC5766]. The DNS RRs in Figure 3 can be used in conjunction with the DNS RRs in Figures 1 and 2 for this purpose. _turn._udp.example.com. IN SRV 0 0 3478 a.example.net. _turn._tcp.example.com. IN SRV 0 0 5000 a.example.net. _turns._tcp.example.com. IN SRV 0 0 5349 a.example.net. Figure 3 5. Security Considerations Security considerations for TURN are discussed in [RFC5766]. The application service tag and application protocol tags defined in this document do not introduce any specific security issues beyond the security considerations discussed in [RFC3958]. [RFC3958] requests that an S-NAPTR application define some form of end-to-end authentication to ensure that the correct destination has been reached. This is achieved by the Long-Term Credential Mechanism defined in [RFC5389], which is mandatory for [RFC5766]. Additionally, the usage of TLS [RFC5246] has the capability to address the requirement. In this case, the client MUST verify the identity of the server by following the identification procedure in Section 7.2.2 of [RFC5389] and by using the value of the parameter as the identity of the server to be verified. An implication of this is that the server's certificate could need to be changed when SRV or NAPTR records are added. For example, a client using just A/AAAA records, and configured with "turnserver.example.net", expects to find the name "turnserver.example.net" in the certificate. If a second client uses SRV records and is configured with parameter "example.com", it expects to find "example.com" in the certificate, even if the SRV record at _turns._tcp.example.com points to turnserver.example.net. Petit-Huguenin Standards Track [Page 8] RFC 5928 TURN Resolution August 2010 6. IANA Considerations This section contains the registration information for one S-NAPTR application service tag and three S-NAPTR application protocol tags (in accordance with [RFC3958]). 6.1. RELAY Application Service Tag Registration Application Protocol Tag: RELAY Intended usage: See Section 3. Interoperability considerations: N/A Security considerations: See Section 5. Relevant publications: RFC 5928 Contact information: Marc Petit-Huguenin Author/Change controller: The IESG 6.2. turn.udp Application Protocol Tag Registration Application Protocol Tag: turn.udp Intended usage: See Section 3. Interoperability considerations: N/A Security considerations: See Section 5. Relevant publications: RFC 5928 Contact information: Marc Petit-Huguenin Author/Change controller: The IESG 6.3. turn.tcp Application Protocol Tag Registration Application Protocol Tag: turn.tcp Intended usage: See Section 3. Interoperability considerations: N/A Security considerations: See Section 5. Petit-Huguenin Standards Track [Page 9] RFC 5928 TURN Resolution August 2010 Relevant publications: RFC 5928 Contact information: Marc Petit-Huguenin Author/Change controller: The IESG 6.4. turn.tls Application Protocol Tag Registration Application Protocol Tag: turn.tls Intended usage: See Section 3. Interoperability considerations: N/A Security considerations: See Section 5. Relevant publications: RFC 5928 Contact information: Marc Petit-Huguenin Author/Change controller: The IESG 7. Acknowledgements Thanks to Cullen Jennings, Alexey Melnikov, Scott Bradner, Spencer Dawkins, Pasi Eronen, Margaret Wasserman, Magnus Westerlund, Juergen Schoenwaelder, Sean Turner, Ted Hardie, Dave Thaler, Alfred E. Heggestad, Eilon Yardeni, Dan Wing, Alfred Hoenes, and Jim Kleck for their comments, suggestions, and questions that helped to improve this document. 8. References 8.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC2782] Gulbrandsen, A., Vixie, P., and L. Esibov, "A DNS RR for specifying the location of services (DNS SRV)", RFC 2782, February 2000. [RFC3958] Daigle, L. and A. Newton, "Domain-Based Application Service Location Using SRV RRs and the Dynamic Delegation Discovery Service (DDDS)", RFC 3958, January 2005. [RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security (TLS) Protocol Version 1.2", RFC 5246, August 2008. Petit-Huguenin Standards Track [Page 10] RFC 5928 TURN Resolution August 2010 [RFC5389] Rosenberg, J., Mahy, R., Matthews, P., and D. Wing, "Session Traversal Utilities for NAT (STUN)", RFC 5389, October 2008. [RFC5766] Mahy, R., Matthews, P., and J. Rosenberg, "Traversal Using Relays around NAT (TURN): Relay Extensions to Session Traversal Utilities for NAT (STUN)", RFC 5766, April 2010. 8.2. Informative References [RFC2629] Rose, M., "Writing I-Ds and RFCs using XML", RFC 2629, June 1999. [TURN-URI] Petit-Huguenin, M., "Traversal Using Relays around NAT (TURN) Uniform Resource Identifiers", Work in Progress, January 2010. [REF-IMPL] Petit-Huguenin, M., "Reference Implementation of TURN resolver and TURN URI parser", January 2010, . Author's Address Marc Petit-Huguenin Unaffiliated EMail: petithug@acm.org Petit-Huguenin Standards Track [Page 11]