Network Working Group J. Kapp Request for Comments: 2286 Reaper Technologies Category: Informational February 1998 Test Cases for HMAC-RIPEMD160 and HMAC-RIPEMD128 Status of this Memo This memo provides information for the Internet community. It does not specify an Internet standard of any kind. Distribution of this memo is unlimited. Copyright Notice Copyright (C) The Internet Society (1998). All Rights Reserved. Abstract This document provides two sets of test cases for HMAC-RIPEMD160 and HMAC-RIPEMD128, respectively. HMAC-RIPEMD160 and HMAC-RIPEMD128 are two constructs of the HMAC [HMAC] message authentication function using the RIPEMD-160 and RIPEMD-128 [RIPE] hash functions. The test cases and results provided in this document are meant to be used as a conformance test for HMAC-RIPEMD160 and HMAC-RIPEMD128 implementations. 1. Introduction The general method for constructing a HMAC message authentication function using a particular hash function is described in section 2 of [HMAC]. In sections 2 and 3 test cases for HMAC-RIPEMD160 and HMAC-RIPEMD128, respectively are provided. Each case includes the key, the data, and the result. The values of keys and data are either hexadecimal numbers (prefixed by "0x") or ASCII character strings in double quotes. If a value is an ASCII character string, then the HMAC computation for the corresponding test case DOES NOT include the trailing null character ('\0') in the string. The C source code of the functions used to generate HMAC-RIPEMD160 and HMAC-RIPEMD128 results is listed in the Appendix. Please Note that the functions provided are implemented in such a way as to be simple and easy to understand as a result they are not optimized in any way. The C source code for computing HMAC-MD5 can be found in [MD5]. Kapp Informational [Page 1] RFC 2286 Test Cases: HMAC-RIPEMD160, HMAC-RIPEMD128 February 1998 2. Test Cases for HMAC-RIPEMD160 test_case = 1 key = 0x0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b key_len = 20 data = "Hi There" data_len = 8 digest = 0x24cb4bd67d20fc1a5d2ed7732dcc39377f0a5668 test_case = 2 key = "Jefe" key_len = 4 data = "what do ya want for nothing?" data_len = 28 digest = 0xdda6c0213a485a9e24f4742064a7f033b43c4069 test_case = 3 key = 0xaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa key_len = 20 data = 0xdd repeated 50 times data_len = 50 digest = 0xb0b105360de759960ab4f35298e116e295d8e7c1 test_case = 4 key = 0x0102030405060708090a0b0c0d0e0f10111213141516171819 key_len = 25 data = 0xcd repeated 50 times data_len = 50 digest = 0xd5ca862f4d21d5e610e18b4cf1beb97a4365ecf4 test_case = 5 key = 0x0c0c0c0c0c0c0c0c0c0c0c0c0c0c0c0c0c0c0c0c key_len = 20 data = "Test With Truncation" data_len = 20 digest = 0x7619693978f91d90539ae786500ff3d8e0518e39 digest-96 = 0x7619693978f91d90539ae786 test_case = 6 key = 0xaa repeated 80 times key_len = 80 data = "Test Using Larger Than Block-Size Key - Hash Key First" data_len = 54 digest = 0x6466ca07ac5eac29e1bd523e5ada7605b791fd8b test_case = 7 key = 0xaa repeated 80 times Kapp Informational [Page 2] RFC 2286 Test Cases: HMAC-RIPEMD160, HMAC-RIPEMD128 February 1998 key_len = 80 data = "Test Using Larger Than Block-Size Key and Larger Than One Block-Size Data" data_len = 73 digest = 0x69ea60798d71616cce5fd0871e23754cd75d5a0a 3. Test Cases for HMAC-RIPEMD128 test_case = 1 key = 0x0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b key_len = 16 data = "Hi There" data_len = 8 digest = 0xfbf61f9492aa4bbf81c172e84e0734db test_case = 2 key = "Jefe" key_len = 4 data = "what do ya want for nothing?" data_len = 28 digest = 0x875f828862b6b334b427c55f9f7ff09b test_case = 3 key = 0xaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa key_len = 16 data = 0xdd repeated 50 times data_len = 50 digest = 0x09f0b2846d2f543da363cbec8d62a38d test_case = 4 key = 0x0102030405060708090a0b0c0d0e0f10111213141516171819 key_len = 25 data = 0xcd repeated 50 times data_len = 50 digest = 0xbdbbd7cf03e44b5aa60af815be4d2294 test_case = 5 key = 0x0c0c0c0c0c0c0c0c0c0c0c0c0c0c0c0c key_len = 16 data = "Test With Truncation" data_len = 20 digest = 0xe79808f24b25fd031c155f0d551d9a3a digest-96 = 0xe79808f24b25fd031c155f0d test_case = 6 key = 0xaa repeated 80 times key_len = 80 data = "Test Using Larger Than Block-Size Key - Hash Key Kapp Informational [Page 3] RFC 2286 Test Cases: HMAC-RIPEMD160, HMAC-RIPEMD128 February 1998 First" data_len = 54 digest = 0xdc732928de98104a1f59d373c150acbb test_case = 7 key = 0xaa repeated 80 times key_len = 80 data = "Test Using Larger Than Block-Size Key and Larger Than One Block-Size Data" data_len = 73 digest = 0x5c6bec96793e16d40690c237635f30c5 4. Security Considerations This document raises no security issues. Discussion on the strength of the HMAC construction can be found in [HMAC]. References [HMAC] Krawczyk, H., Bellare, M., and R. Canetti, "HMAC: Keyed-Hashing for Message Authentication", RFC 2104, February 1997. [MD5] Rivest, R., "The MD5 Message-Digest Algorithm", RFC 1321, April 1992. [OG] Oehler, M., and R. Glenn, "HMAC-MD5 IP Authentication with Replay Prevention", RFC 2085, February 1997 [CG] Chang, S., and R. Glenn, "Test Cases for HMAC-MD5 and HMAC-SHA-1", RFC 2202, September 1997. [RIPE] Dobbertin, H., Bosselaers A., and Preneel, B. "RIPEMD-160: A Strengthened Version of RIPEMD" April 1996 Author's Address Justin S. Kapp Reaper Technologies The Post Office, Dunsop Bridge Clitheroe, Lancashire. BB7 3BB. United Kingdom EMail: skapp@reapertech.com Kapp Informational [Page 4] RFC 2286 Test Cases: HMAC-RIPEMD160, HMAC-RIPEMD128 February 1998 Appendix This code which implements HMAC-RIPEMD160 using an existing RIPEMD- 160 library. It assumes that the RIPEMD-160 library has similar API's as those of the MD5 code described in RFC 1321. The code for HMAC-MD5, is similar, this HMAC-MD5 code is also listed in RFC 2104. To adapt this example to produce the HMAC-RIPEMD128 then replace each occurance of 'RMD160' with 'RMD128'. #ifndef RMD160_DIGESTSIZE #define RMD160_DIGESTSIZE 20 #endif #ifndef RMD128_DIGESTSIZE #define RMD128_DIGESTSIZE 16 #endif /* HMAC_RMD160 implements HMAC-RIPEMD160 */ void HMAC_RMD160(input, len, key, keylen, digest) unsigned char *input; /* pointer to data stream */ int len; /* length of data stream */ unsigned char *key; /* pointer to authentication key */ int keylen; /* length of authentication key */ unsigned char *digest; /* resulting MAC digest */ { RMD160_CTX context; unsigned char k_ipad[65]; /* inner padding - key XORd with ipad */ unsigned char k_opad[65]; /* outer padding - key XORd with opad */ unsigned char tk[RMD160_DIGESTSIZE]; int i; /* if key is longer than 64 bytes reset it to key=SHA1(key) */ if (keylen > 64) { RMD160_CTX tctx; RMD160Init(&tctx); RMD160Update(&tctx, key, keylen); RMD160Final(tk, &tctx); key = tk; keylen = RMD160_DIGESTSIZE; } /* The HMAC_SHA1 transform looks like: RMD160(K XOR opad, RMD160(K XOR ipad, text)) Kapp Informational [Page 5] RFC 2286 Test Cases: HMAC-RIPEMD160, HMAC-RIPEMD128 February 1998 where K is an n byte key ipad is the byte 0x36 repeated 64 times opad is the byte 0x5c repeated 64 times and text is the data being protected */ /* start out by storing key in pads */ memset(k_ipad, 0x36, sizeof(k_ipad)); memset(k_opad, 0x5c, sizeof(k_opad)); /* XOR key with ipad and opad values */ for (i=0; i